Function parameters High-speed module placement machine RX-7R
Substrate size Monorail specification 50×50～510mm*²*³×450mm
Dual-track specification Single-track mode 50×50～510mm*²*³×450mm
Dual-track specification Dual-track mode 50×50～510mm*²*³×250mm
Part height P16S×P16S nozzle head 3mm
P16S×P8*1 nozzle head 3mm (P16S nozzle head)
10.5mm (P8 nozzle head)
P8×P8*1 nozzle head 10.5mm
Part size P16S×P16S nozzle head 03015*⁴～□5mm
P16S×P8*1 nozzle head 03015*⁴～□5mm (P16S nozzle head)
0603～□25mm (P8 nozzle head)
P8×P8*1 nozzle head 0603～ 25mm
Part placement speed (optimum condition) P16S×P16S nozzle head chip parts 75,000 CPH
–
P16S×P8*1 nozzle head chip parts 54,900 CPH
IC parts 6,400 CPH*³
P8×P8*1 nozzle head chip parts 34,800 CPH
IC parts 12,800 CPH
Part placement accuracy P16S×P16S nozzle head Chip parts ±0.04mm (Cpk≧1) –
P16S×P8*1 nozzle head chip parts ±0.04mm (Cpk≧1) IC parts ±0.04mm
P8×P8*1 nozzle head chip parts ±0.04mm (Cpk≧1) IC parts ±0.05mm
Number of parts to mount up to 56 types*⁶
Power supply Three-phase AC200V, 220V-430V*⁷
Electricity 2.3kVA
Working air pressure 0.5±0.05MPa
Air consumption (standard state) 20L/min ANR (normal operation)
Dimensions (W×D×H)*9 998×1,895×1,530mm*⁸
Weight Approx. 1,820kg*¹⁰
*1 Please inquire about the corresponding period
*2 When the X dimension of the board size is within 50mm~350mm, BOC marks, bad board marks, and 2D codes can be recognized.
*3 In the long board mode. (When the X dimension is within 420mm, 2 pieces can be produced at the same time)
*4 Please inquire for details
*5 Compatible only with P8 nozzle head
*6 When using electric dual rail feeder RF08AS
*7 For 220V-43V specifications, an optional transformer is required.
*8 Compared with the specification of 8 nozzle heads, compared with the specification of 16 nozzle heads, the position is shifted to the front and side by +123 mm when the trolley is installed
*9 Depth D does not include display, height H is measured according to the conveying height of 900mm, excluding signal lights
*10 When P16S×P16S nozzle head, two-rail specification, and exchange trolleys at a time
JUKI RX-7R High Speed Modular Mounter placement pick and palce machine
P16S+P16S high-precision rotary placement head, which can support 56 kinds of placement materials at the same time. 998mm modular body design, more efficient left and right operation surfaces, 2.3Kwv ultra-low rated power
PCB size: 510*450mm Mounting speed: 75000 CPH
Component size: 03015~port 5mm Component types: 56
Component height: 3mm Rated power: 2.3KVA
Mounting accuracy: ±0.04mm (Cpk≥1) Body size: 998*1895*1530mm
Description
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Panasonic Mounter CM402-L Modular Super High Speed placement machine
Model name: CM402-L
Substrate size: L50mm×W50mm～L510mm×W460mm
Substrate replacement time: 0.9s (when the substrate length is below 240mm and under the best conditions)
Power supply*1: three-phase AC200V, 3.5kVA
Air pressure source*2: 0.49MPa, 150L/min (A.N.R.)
Equipment size: W2350mm×D2690mm×H1430mm*3
Weight*4: 3000kg
High-speed placement head
Mounting fastest speed: 0.06s/chip (Type A)
Mounting accuracy: ±50μm/chip (Cpk≧1)
Component size: 0603 chip~L24mm×W24mm
Multifunctional placement head
Mounting fastest speed: 0.21s/QFP (Type B)
Mounting accuracy: ±35μm/QFP (Cpk≧1)
Component size: 0603 chip~L100mm×W90mm
Panasonic Mounter CM602-L high-speed placement machine
Control mode: microcomputer mode
External memory: Manage data at PT∗4. Each set of data requires about 1MB. (1 type is required for each 1 type 3.5 2HD floppy disk)
Program data: Points Max. 10000 points
CM602 power supply
Power supply for normal use: 3-phase AC 200 V/ 220 V ±10 V, 3-phase AC 380 V/ 400 V/ 420 V/ 480 V ±20 V Frequency: 50/60 Hz
Power supply for HUB ∗ 3: Single-phase AC 100 V ~ AC 240 V Frequency: 50/60 Hz
Rated capacity: main machine 4.0 kVA / HUB power supply ∗ 3: 140 VA
Supply air pressure: 0.49 MPa ~ 0.78 MPa (operating air pressure is 0.49 MPa ~ 0.54 MPa)
Supply air volume: 170 L/min (A.N.R.)
Dimensions: 2350 mm (W) × 2690 mm (D) × 1430 mm (H) (excluding 3-section signal tower and color touch panel)
quality:
Mass of the main engine: 3400 kg (140 kg for the standard configuration without the overall exchange trolley)
Overall exchange trolley mass: 140 kg (per 1)
Direct tray feeder mass: 195 kg (per 1 unit)
Standard composition mass: 3960 kg (1 main engine, 4 overall exchange trolleys)
Environmental conditions: Temperature: 10°C ~ 35°C Humidity: 25% RH ~ 75% RH (but water vapor does not condense)
Transport and storage conditions: Temperature: −20°C ~ 60°C Humidity: Below 75 % RH (but water vapor does not condense)
Altitude: from 0 m above sea level to below 1000 m
Noise: < 70dB (A)
Samsung Hanwha High Speed Mounter DECANS2
Specifications
- Alignment
- Fly Camera, Fix Camera
- Spindle & Speed
- 2 Gantry * 10 Spindle / 92,000 CPH
- Accuracy
- ±28 μm @ Cpk ≥ 1.0 (03015 Chip) / ±25 μm @ Cpk ≥ 1.0(IC)
- Component Range
- Fly: 03015 ~ □12 mm / Fix: ~□42 mm (Standard) / ~□55 mm (MFOV) / ~ L75 mm Connector (MFOV)
- Dimension
- L 1,430 x D 1,740 x H 1,995
Panasonic Mounter NPM-TT2 multifunctional production system placement machine
The Panasonic Mounter NPM-TT2 is a line configuration capable of achieving both high productivity per unit area and versatility *When directly connecting the NPM-W2, an M-size double-track conveyor belt (optional) is required. The placement head (8-nozzle placement head, 3-nozzle placement head - you can choose the general-purpose 8-nozzle placement head or the 3-nozzle placement head with special-shaped component capability) The specification of the supply part can be selected .change. By reorganizing the tray feeder/exchange trolley, the line configuration can be adapted to the component supply form. Using a multi-functional recognition camera, the recognition and inspection of the height direction of the components can be realized at a high speed, and it can carry out stable and high-speed mounting of special-shaped components) Alternate mounting and independent mounting correspondence
——(can choose the best mounting method corresponding to the production substrate)
Reviews
There are no reviews yet.