Click to enlarge
Samsung Mounter SM321 Pick&Place machine
Back to products
Samsung Mounter SM421 Pick&Place machine

Samsung Mounter SM411F Pick&Place machine

Enquiry
Categories: ,
Description

SAMSUNG SM411F DESCRIPTION:

Alignment

Flying Vision + Stage Vision

Placement Rate

Flying Vision

ㆍ1608 Chip :  30,000 CPH (IPC9850)
ㆍSOP         :  23,000 CPH (IPC9850)
ㆍQFP         :  5,500 CPH (IPC9850)

Stage Vision

1.4sec/QFP208P(Tray supply standard)

Placement Accuracy

Chip
QFP

±50㎛＠u+3∂/chip
±30㎛＠u+3∂/chip

Short Distance Plasement

0.1mm(0603)/0.15mm(1005)

Component Range
Flying Visionㆍ0603 ~ □22mm chip
ㆍQFP,BGA
ㆍ0402 CHIP(Option)

Stage Vision

ㆍ~ □55mm (up to vision size)
ㆍ~ □32mm IC(0.3P QFP, 0.5P BGA)
ㆍ~ □42mm IC(0.4P QFP, 1.0P BGA)Max Height

ㆍH 12mm

Feeder Slot

ㆍMax 120EA(8mm)

ㆍMax 116EA(8mm/Docking Cart)

Board Dimension (mm)

min PCB

50(L)*50(W)

max PCB

ㆍ510(L)*300(W) : Standard
ㆍ510(L)*350(W) : Option
ㆍ610(L)*350(W) : Option

ㆍ740(L)*420(W) : Option

PCB Thickness

0.38~4.2mm

Weight

1,800 kgUtillity

Power

AC 200/220/380/415V (50/60Hz,3Phase)

Air consumption

5~7Kg/㎡, 300Nl/min

External Dimension (mm)

1650(L)*1690(W)*1485(H)

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Reviews

There are no reviews yet.

Be the first to review “Samsung Mounter SM411F Pick&Place machine”

Your email address will not be published. Required fields are marked *

Related products

Hanwha High Speed ​​General Mounter DECAN L2

,

Specifications

Alignment
Fly Camera, Fix Camera
Spindle & Speed
2 Gantry * 6 Spindle / 56,000 CPH
Accuracy
±40µm Cpk≥1.0 (0402 (01005 inch) chip) /±30µm Cpk≥1.0 (IC, Stage Vision)
Component Range
Fly: 0402 ~ □21 mm / Fix: ~□42 mm (Standard) / ~□55 mm (MFOV) / ~ L75 mm Connector (MFOV)
Dimension
L 1,430 x D 1,740 x H 1,995
Enquiry

SMT ASM Siemens Mounter Placement machine SIPLACE SX4

,
SMT ASM Siemens Mounter SIPLACE SX4 Gantry Quantity: 4 IPC Speed: 102,000cph SIPLACE Benchmark Evaluation: 120,000cph Theoretical Speed: 135,000cph 3σ Angle Accuracy: ±0.05°/3σ
Enquiry

SMT placement machine ASM Siemens placement machine TX2i/TX2/TX1

,
Introduction to ASM Siemens Mounter TX2i: ASM Siemens Mounter TX2i: Provide high performance and high precision in a very small footprint. The ASM Siemens Mounter TX2i mounter module sets a new benchmark for mass production. No other placement solution can achieve 25 µm @ 3 sigma accuracy at speeds up to 96,000 cph in such a small footprint (only 1m x 2.3m).
Enquiry

Panasonic Mounter CM602-L high-speed placement machine

,
Control mode: microcomputer mode External memory: Manage data at PT∗4. Each set of data requires about 1MB. (1 type is required for each 1 type 3.5 2HD floppy disk) Program data: Points Max. 10000 points CM602 power supply Power supply for normal use: 3-phase AC 200 V/ 220 V ±10 V, 3-phase AC 380 V/ 400 V/ 420 V/ 480 V ±20 V Frequency: 50/60 Hz Power supply for HUB ∗ 3: Single-phase AC 100 V ~ AC 240 V Frequency: 50/60 Hz Rated capacity: main machine 4.0 kVA / HUB power supply ∗ 3: 140 VA Supply air pressure: 0.49 MPa ~ 0.78 MPa (operating air pressure is 0.49 MPa ~ 0.54 MPa) Supply air volume: 170 L/min (A.N.R.) Dimensions: 2350 mm (W) × 2690 mm (D) × 1430 mm (H) (excluding 3-section signal tower and color touch panel) quality: Mass of the main engine: 3400 kg (140 kg for the standard configuration without the overall exchange trolley) Overall exchange trolley mass: 140 kg (per 1) Direct tray feeder mass: 195 kg (per 1 unit) Standard composition mass: 3960 kg (1 main engine, 4 overall exchange trolleys) Environmental conditions: Temperature: 10°C ~ 35°C Humidity: 25% RH ~ 75% RH (but water vapor does not condense) Transport and storage conditions: Temperature: −20°C ~ 60°C Humidity: Below 75 % RH (but water vapor does not condense) Altitude: from 0 m above sea level to below 1000 m Noise: < 70dB (A)
Enquiry

Samsung Hanwha High Speed ​​Mounter DECANS2

,

Specifications

Alignment
Fly Camera, Fix Camera
Spindle & Speed
2 Gantry * 10 Spindle / 92,000 CPH
Accuracy
±28 μm @ Cpk ≥ 1.0 (03015 Chip) / ±25 μm @ Cpk ≥ 1.0(IC)
Component Range
Fly: 03015 ~ □12 mm / Fix: ~□42 mm (Standard) / ~□55 mm (MFOV) / ~ L75 mm Connector (MFOV)
Dimension
L 1,430 x D 1,740 x H 1,995
Enquiry

Samsuang Hanwha DECAN F2

,

Specifications

Alignment
Fly Camera, Fix Camera
Spindle & Speed
2 Gantry * 10 Spindles / 80,000 CPH
Accuracy
±40µm Cpk≥1.0 (0402 (01005 inch) chip) /±30µm Cpk≥1.0 (IC, Stage Vision)
Component Range
Fly: 0402 ~ □16 mm / Fix: ~□42 mm (Standard) / ~□55 mm (MFOV) / ~ L75 mm Connector (MFOV)
Dimension
L 1,430 x D 1,740 x H 1,995
Enquiry

Panasonic Mounter NPM-TT2 multifunctional production system placement machine

,
The Panasonic Mounter NPM-TT2 is a line configuration capable of achieving both high productivity per unit area and versatility *When directly connecting the NPM-W2, an M-size double-track conveyor belt (optional) is required. The placement head (8-nozzle placement head, 3-nozzle placement head - you can choose the general-purpose 8-nozzle placement head or the 3-nozzle placement head with special-shaped component capability) The specification of the supply part can be selected .change. By reorganizing the tray feeder/exchange trolley, the line configuration can be adapted to the component supply form. Using a multi-functional recognition camera, the recognition and inspection of the height direction of the components can be realized at a high speed, and it can carry out stable and high-speed mounting of special-shaped components) Alternate mounting and independent mounting correspondence ——(can choose the best mounting method corresponding to the production substrate)
Enquiry

Panasonic NPM-D3 placement machine Panasonic high-speed module placement machine

,
1. Panasonic NPM-D3 placement machine, Panasonic placement machine NPM-D3, Panasonic high-speed module placement machine parameters: 1. Model name: NPM-D3 (Panasonic
Enquiry