Fuji placement machine NXT second generation M3/M6 parameters:

M3 II/M6 II: 48mm x 48mm~510mm x 534mm (double transport rail)
48mm x 48mm~610mm x 534mm (single transport track)
M6 IISP: 48mm x 48mm~510mm x 520mm (double transport rail)
48mm x 48mm~610mm x 520mm (single transport track)

Fuji placement machine NXT second generation M3/M6 component types:
M3 II: MAX 20 types (8mm tape conversion)
M6 II/M6 IISP: MAX 45 types (8mm tape conversion)

Mounting accuracy of Fuji placement machine NXT second generation M3/M6:
H12S/H08/H04/OF: ±0.05mm(3 sigma) cpk≥1.00
H01/H02/G04: ±0.03mm(3 sigma) cpk≥1.00
GL: ±0.10mm(3 sigma) cpk≥1.00

FUJI Mounter NXTM3/M6 second generation production capacity:
M3 II/M6 II: (H12HS:22,500 cph; H08:10,500 cph; H04:6,500 cph; H01:4,200 cph; G04:6,800 cph; OF:M3 II not available/M6 II 3000 cph; GL:16,363 dph(0.22 sec/dot))
M6 II SP: (H12S:18,500 cph; H08:10,000 cph; H04:6,000 cph; H01:3,500 cph; G04:5,100 cph; OF:2,800 cph; GL:16,363 dph(0.22 sec/dot))

FUJI Fuji placement machine NXTM3/M6 second generation target components:
H12S: 0402~7.5mm x 7.5mm Height: MAX 3.0mm
H08:0402~12mm x 12mm Height:MAX 6.5mm
H04: 1608~38mm x 38mm Height: MAX13mm
H01/H02/OF:1608~74mm x 74mm(32mm X 180mm) Height: MAX 25.4mm
G04: 0402~15.0mm x 15.0mm Height: MAX 6.5mm

FUJI Mounter NXTM3/M6 second-generation component supply:
Intelligent feeder: corresponding to 8, 12, 16, 24, 32, 44, 56, 72, 88mm width strips
Tube feeder: 4≤component width≤15mm (6≤tube width≤18mm), 15≤component width≤32mm (18≤tube width≤36mm)
Tray unit: 135.9X322.6mm (JEDEC specification) (Tray unit M), 276X330mm, 138X330mm (Tray unit LT)
Machine size:
2MII Base: 740(L) x 1934(W)
4M II Base: 1390(L) x 1934(W)
H: 1474 mm (M3 II) 1476 mm (M6 II/M6 IISP)

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Click to enlarge

Back to products

Fuji placement machine NXT II second generation M3/M6 PICK AND PLACE MACHINE MOUNTER

Enquiry

Categories: FUJI, SMT placement machine

Description
Shipping & Delivery

Description

Shipping & Delivery

Reviews

There are no reviews yet.

Be the first to review “Fuji placement machine NXT II second generation M3/M6 PICK AND PLACE MACHINE MOUNTER”

Related products

Yamaha 3D Hybrid Modular S10/S20 Mounter placement machine

SMT placement machine, Yamaha

Specifications

	S10	S20
Board size(with buffer unused)	Min. L50 x W30mm to Max. L1,330 x W510mm (Standard L955)	Min. L50 x W30mm to Max. L1,830 x W510mm (Standard L1,455)
Board size(with input or output buffer used)	Min. L50 x W30mm to Max. L420 x W510mm	-
Board size(with input and output buffers used)	Min. L50 x W30mm to Max. L330 x W510mm	Min. L50 x W30mm to Max. L540 x W510mm
Board thickness	0.4 - 4.8mm	0.4 - 4.8mm
Board flow direction	Left to right (Std)	Left to right (Std)
Board transfer speed	Max 900mm/sec	Max 900mm/sec
Placement speed (12 heads + 2 theta) Opt. Cond.	0.08sec/CHIP (45,000CPH)	0.08sec/CHIP (45,000CPH)
Placement accuracy A (μ+3σ)	CHIP +/-0.040mm	CHIP +/-0.040mm
Placement accuracy B (μ+3σ)	IC +/-0.025mm	IC +/-0.025mm
Placement angle	+/-180 degrees	+/-180 degrees
Z axis control / Theta axis control	AC servo motor	AC servo motor
Component height	Max 30mm^*1 (Pre-placed components: max 25mm)	Max 30mm^*1 (Pre-placed components: max 25mm)
Applicable components	0201mm – 120x90mm, BGA, CSP, connector, etc. (Standard 01005 -)	0201mm – 120x90mm, BGA, CSP, connector, etc. (Standard 01005 -)
Component package	8 - 56mm tape (F1/F2 Feeders), 8 - 88mm tape (F3 Electric Feeders), stick, tray	8 - 56mm tape (F1/F2 Feeders), 8 - 88mm tape (F3 Electric Feeders), stick, tray
Drawback check	Vacuum check and vision check	Vacuum check and vision check
Screen language	English, Chinese, Korean, Japanese	English, Chinese, Korean, Japanese
Board positioning	Board grip unit, front reference, auto conveyor width adjustment	Board grip unit, front reference, auto conveyor width adjustment
Component types	Max 90 types (8mm tape), 45 lanes x 2	Max 180 types (8mm tape), 45 lanes x 4
Transfer height	900 +/- 20mm	900 +/- 20mm
Machine dimensions, weight	L1250xD1750xH1420mm, Approx. 1,200kg	L1750xD1750xH1420mm, Approx. 1,500kg

*1 :: Board thickness + Component height = Max 30mm

Specifications and appearance are subject to change without prior notice.

Yamaha Premium High-efficiency Modular YRM20 Mounter placement machine

Model	YRM20
Model	Super high-speed rotary RM head	High-speed general-purpose in-line HM head	Odd-shaped components in-line FM (flexible-multi) head
Nozzles (per 1 head unit)	18	10	5
Applicable components	0201mm to W12 x L12mm, Height 6.5mm or less	0201mm to W55 x L100mm, Height 15mm or less	03015mm to W55 x L100mm, Height 30mm or less
Mounting capability under optimum conditions (in high production mode)	2-beam : 115,000CPH (under optimum conditions) 1-beam : 57,500CPH (under optimum conditions)	2-beam : 98,000CPH (under optimum conditions) 1-beam : 49,000CPH (under optimum conditions)	2-beam : 35,000CPH (under optimum conditions) 1-beam : 17,500CPH (under optimum conditions)
Mounting accuracy (high-accuracy mode)	±0.025mm Cpk≧1.0 (under optimum conditions)		±0.035mm Cpk≧1.0 (under optimum conditions)
Number of component types	Feeder carriage exchange : Max. 128 types = 32 feeders x 4 (conversion for 8mm tape feeder) Fixed plate : Max. 128 types (conversion for 8mm tape feeder), Trays : 60 types (maximum when equipped with eATS30 x 2)
PCB dimensions	1-beam : (Single lane) Standard specifications : L50 x W50mm to L510 x W510mm, option : L50 x W50mm to L810 x W510mm 2-beam : (Dual stage) 1-PCB conveyance : L50 x W50mm to L810 x W510mm, 2-PCB conveyance : L50 x W50mm to L380 x W510mm
Power supply	3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
Air supply source	0.45MPa or more, in clean, dry state
External dimension (excluding projections)	L1,374 x W1,948 x H1,445mm
Weight	2-beam : Approx. 2,250kg (Main unit only), 1-beam : Approx. 2,150kg (Main unit only)

SMT placement machine ASM Siemens placement machine TX2i/TX2/TX1

SMT placement machine, ASM SIEMENS

Introduction to ASM Siemens Mounter TX2i: ASM Siemens Mounter TX2i: Provide high performance and high precision in a very small footprint. The ASM Siemens Mounter TX2i mounter module sets a new benchmark for mass production. No other placement solution can achieve 25 µm @ 3 sigma accuracy at speeds up to 96,000 cph in such a small footprint (only 1m x 2.3m).

SMT placement machine Siemens ASM SIPLACE HS50 high-speed placement machine

1. The size of the parts that can be attached: from 0201 (0.25mmx0.5mm) to 18.7mmx18.7mm. 2. The types of parts that can be loaded at one time: 144 types (8mm parts). 3. SMT speed: 50,000 parts/hour. 4. Chip accuracy: ±0.075 (at 4sigma). 5. Material station: 144

Panasonic CM202 placement machine Mounter

SMT placement machine, Panasonic

Main parameters of CM202 placement machine: 2004 equipment PCB size: 460mm×360mm Component range that can be attached: 0201 to 24mmQFPS Material station: 104 Theoretical placement speed: 0.088s/chip 40909 pieces/hour Mounting accuracy: ±0.05mm Dimensions and Weight: 2,350(L) X 1,950(D) X 1,430(H)mm&2,800kg Power supply and air source: 3P/200V±10V/3KVa

Yamaha Wide-Range Compact Modular YC8 Mounter placement machine

		YC8
Applicable PCB		L50 x W50mm to L330 x W360mm ^*1
Mounting accuracy	When using Yamaha's standard components	Absolute accuracy (μ+3σ):+/-0.05mm /QFP Repeatability(3σ) +/-0.03mm /QFP
Mounting capability	Indication	2.5sec/component (Cycle time from a pickup to mounting with recognition)
Applicable components		4 x 4mm to 100 x 100mm ^*2 (Some components larger than 45 x 45mm ane conditional) Maximum components heights 45mm Maximum payload 1kg
Component supply configuration: Number of component types		Tape reel : MAX. 28 types (8mm width) Tray : MAX. 15 trays Stick
Power supply		3-Phase AC 200/208/220/240/380/400/416V　+/-10%　50/60Hz
Air supply source		0.45MPa or more, in clean, dry states
External dimension (excluding projections)		L 880 x W1,440 x H1,445mm (Main unit only) L 880 x W1,755 x H1,500mm (When ATS15 is installed)
Weight		Approx. 1,000kg (Main unit only) ATS15 : Approx. 120kg

*1: Please consult us separately for maximum board sizes.

*2: Consult us separately regarding component sizes outside the specifications.

High-efficiency Modular Z:LEX YSM20WR Mounter placement machine

Model	YSM20WR
Applicable PCB	Dual lane ^{Note 1} Same type PCBs: L810 x W356 to L50 x W50 Different type PCBs: up to L810 x W662 ^{Note 2} Same type PCB: L810 x W280 to L50 x W500 Different type PCBs: up to L810 x W510
Head / Applicable components	High-Speed Multi (HM) Head ^{Note 3} 0201mm to W55 x L100mm, Height 15mm or less Odd-shaped components (FM: Flexible Multi) head: 03015mm to W55 x L100mm, Height 28mm or less
Mounting capability (under optimum conditions as defined by Yamaha Motor)	X axis 2-beam ^{Note 1}: High-speed multi-purpose (HM: High-speed Multi) head x 2 81,000CPH
Mounting accuracy	±0.035mm (±0.025mm) Cpk≧1.0 (3σ) (under optimum conditions as defined by Yamaha Motor when standard evaluation materials are used)
Number of component Types	Fixed plate: Max. 140 types (conversion for 8mm tape feeder) Feeder carriage exchange: Max. 128 types (conversion for 8mm tape feeder) Trays for 30 types (Fixed type: max., when fitted with sATS30) and 10 types (Carriage type: max., when fitted with cATS10)
Power supply	3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
Air supply source	0.45MPa or more, in clean, dry state
External dimension (excluding projections)	L 1,374 x W 2,110 x H1,445mm (Main unit only)
Weight	Approx. 2,500kg (Main unit only)

Note 1 : When using conveyor separation specifications of 787mm between 1 to 4 lanes

Note 2 : When using conveyor separation specifications of 630mm between 1 to 4 lanes

Note 3 : Please contact us for info regarding mounting 0201mm components.

Hanwha High Speed General Mounter DECAN L2

SMT placement machine, Samsung Hanwha

Alignment: Fly Camera, Fix Camera

Spindle & Speed: 2 Gantry * 6 Spindle / 56,000 CPH

Accuracy: ±40µm Cpk≥1.0 (0402 (01005 inch) chip) /±30µm Cpk≥1.0 (IC, Stage Vision)

Component Range: Fly: 0402 ~ □21 mm / Fix: ~□42 mm (Standard) / ~□55 mm (MFOV) / ~ L75 mm Connector (MFOV)

Dimension: L 1,430 x D 1,740 x H 1,995